CABLE FITTING DIAGRAMS:

Need help figuring out which cable you need? See diagrams below.

HOW TO FIT YOUR HOPPER BIN WITH A CABLE:

TO FIND INTERCONNECT LENGTH (outside cable): Measure from the middle of your bin, to the edge (radius). Measure the full height of your bin. Add those 2 numbers together. This is your interconnect outside cable length. REFER TO GREEN ARROWS

TO FIND MOISTURE / TEMP CABLE LENGTH: Measure from the centre of the roof of your bin down to where your aeration starts. If you have a rocket, you may attach the cable inside the rocket. If you have horizontal aeration, you may tie the cable around it. REFER TO PINK ARROW.

THIS BIN REQUIRES A 5 SENSOR (20ft) CABLE WITH A 40FT INTERCONNECT OUTSIDE CABLE.

HOW TO FIT YOUR FLAT BOTTOM BIN WITH A CABLE: 

TO FIND INTERCONNECT LENGTH (outside cable): Measure from the middle of your bin, to the edge (radius). Measure the full height of your bin. Add those 2 numbers together. This is your interconnect outside cable length. REFER TO GREEN ARROWS.                

TO FIND MOISTURE / TEMP CABLE LENGTH: Measure from the centre of the roof of your bin down to the floor. If you have an unload system, deduct another foot or two. REFER TO PINK ARROW.

THIS BIN REQUIRES A 3 SENSOR CABLE WITH A 20FT INTERCONNECT OUTSIDE CABLE.            

If this didn't help, feel free to CONTACT US!