Steep Dump Angle
The rock picker is equipped with two 3-by-31-inch hydraulic cylinders with hardened shafts to tip the hopper. The system is designed with a 38-inch dump height and extra-steep dumping angle to ensure all rocks and debris are removed.
|
Extra-Long Hitch
An extra-long hitch provides greater visibility of the rock picking operation when using a tractor equipped with dual rear wheels. A shorter hitch can be special ordered upon request.
|
Heavy Duty Batts
The large-diameter reel is engineered with three reinforced batts for maximum durability. The batts feature a spring-loaded trip action, allowing them to operate damage-free in tough conditions. For added reliability, the batts pivot on greaseable steel pins within replaceable bushings.
|
Planetary Hydraulic Direct Drive
There are no chains or sprockets to wear out and constantly adjust. Our low-maintenance, high-torque reduction planetary gear system runs in an oil bath and is direct coupled to the hydraulic motor, which is internally protected for extreme use.
|
Thick Steel Frame
To withstand heavy abuse, we gave the rock picker a durable frame made of reinforced 5-inch square tubing.
|
Flotation Tires
The standard 16.5L x 16.1 tires are ideal for use on any soil profile.
|
Hydraulic Swing Hitch
By activating your third hydraulic remote, you can swing the hitch from transport position to the offset position for ample working clearance.
|
Reinforced Hopper
The high-capacity hopper is gusseted for added stiffness and strength. It also has a grated floor and perforated back plate for maximum sifting of dirt.
|
Extra-Long Tines
The specially contoured picking tines are extra long, so more dirt can fall through before reaching the hopper.
|
Clevis Hitch
A clevis hitch comes standard on the Rock Picker.
|
Electric Solenoid Lift
This option allows simultaneous operation of the reel and rake on open-center tractor hydraulic systems with insufficient oil flow.
|