Proper grain storage is key to ensuring that grain remains safe and in optimal condition while awaiting transportation. Meridian hopper bins are one of the most popular and convenient ways to store grain. With the addition of the right accessories and tools, grain bin storage becomes even more favourable. When looking for grain bin accessories that optimize your processes even further, you can turn to the experts at Avonlea Farm Sales Ltd.
Founded by farmers in 1988, Avonlea Farm Sales is dedicated to providing you with the farming equipment you need to make your life easier while increasing your productivity. We carry a selection of grain bin accessories to help you stay prepared for anything. Find Meridian hopper bins for sale paired with the best accessories. Contact a member of our team today and let the experts at Avonlea help you make the most of your time.
Name | Range | Amount |
---|---|---|
P & H | 1 - 100 | 2 % |
This Temperature Cable Kit will fit a Flat Bottom bin that has a MINIMUM INSIDE HEIGHT from the top of the roof to the bin floor of 24ft to a max of 27ft. If there is an unload in the bin, deduct 1ft.
This kit includes: 1- 6 sensor cable, 1- 35ft interconnect & 1- Docking station.
This cable mounts inside of the bin and is capable of monitoring Grain Temperature.
This cable is 23 feet long.
CABLE FITTING DIAGRAMS:
Need help figuring out which cable you need? See diagrams below.
HOW TO FIT YOUR HOPPER BIN WITH A CABLE:
TO FIND INTERCONNECT LENGTH (outside cable): Measure from the middle of your bin, to the edge (radius). Measure the full height of your bin. Add those 2 numbers together. This is your interconnect outside cable length. REFER TO GREEN ARROWS
TO FIND MOISTURE / TEMP CABLE LENGTH: Measure from the centre of the roof of your bin down to where your aeration starts. If you have a rocket, you may attach the cable inside the rocket. If you have horizontal aeration, you may tie the cable around it. REFER TO PINK ARROW.
THIS BIN REQUIRES A 5 SENSOR (20ft) CABLE WITH A 40FT INTERCONNECT OUTSIDE CABLE.
HOW T O FIT YOUR FLAT BOTTOM BIN WITH A CABLE:
TO FIND INTERCONNECT LENGTH (outside cable): Measure from the middle of your bin, to the edge (radius). Measure the full height of your bin. Add those 2 numbers together. This is your interconnect outside cable length. REFER TO GREEN ARROWS.
TO FIND MOISTURE / TEMP CABLE LENGTH: Measure from the centre of the roof of your bin down to the floor. If you have an unload system, deduct another foot or two. REFER TO PINK ARROW.
THIS BIN REQUIRES A 3 SENSOR CABLE WITH A 20FT INTERCONNECT OUTSIDE CABLE.
If this didn't help, feel free to CONTACT US!
This cable attaches to the inside sensing cable at the top of the bin. Interconnect cables extend the length of the bin along the outside to allow cable reading from the ground.
This cable is 35 feet long.
The Docking Station protects the sensing cable from static electricity damage when not plugged in to a monitor. It is installed on to the grain bin and plugs in to the bottom of the interconnect cable.