Too much moisture in your grain bin can be detrimental to the quality of your grain and may even lead to reduced profits if additional drying is required. If you use a Meridian hopper bin or other grain bin storage solution, you’ll want to be sure you have grain bin moisture sensors to protect your product. When looking for grain bin moisture cables or a grain bin moisture probe, you can rely on the experts at Avonlea Farm Sales Ltd.
Founded by farmers in 1988, Avonlea Farm Sales understands the unique needs of farmers and is dedicated to providing high-quality equipment that helps to improve processes and increase productivity. We know that grain bin moisture monitoring is an important part of the grain storage process. Let us help you find the ideal grain bin moisture sensors for your farm and protect your hard work from going to waste.
All Grain Bin Accessories | Aeration Systems | Aeration Fans | Heaters | Grain Bin Lids | Monitoring Systems | Moisture Monitoring | Temperature Monitoring
Name | Range | Amount |
---|---|---|
P & H | 1 - 100 | 2 % |
This Moisture Cable Kit will fit a Hopper bin with a MINIMUM INSIDE HEIGHT from the top of the roof to the aeration in the cone of 28ft to a max fo 31ft.
This kit includes: 1- 7 sensor, 1- 45ft interconnect & 1- Docking station.
This cable mounts inside of the bin and is capable of monitoring Grain Temperature and moisture.
This cable is 27 feet long.
CABLE FITTING DIAGRAMS:
Need help figuring out which cable you need? See diagrams below.
HOW TO FIT YOUR HOPPER BIN WITH A CABLE:
TO FIND INTERCONNECT LENGTH (outside cable): Measure from the middle of your bin, to the edge (radius). Measure the full height of your bin. Add those 2 numbers together. This is your interconnect outside cable length. REFER TO GREEN ARROWS
TO FIND MOISTURE / TEMP CABLE LENGTH: Measure from the centre of the roof of your bin down to where your aeration starts. If you have a rocket, you may attach the cable inside the rocket. If you have horizontal aeration, you may tie the cable around it. REFER TO PINK ARROW.
THIS BIN REQUIRES A 5 SENSOR (20ft) CABLE WITH A 40FT INTERCONNECT OUTSIDE CABLE.
HOW T O FIT YOUR FLAT BOTTOM BIN WITH A CABLE:
TO FIND INTERCONNECT LENGTH (outside cable): Measure from the middle of your bin, to the edge (radius). Measure the full height of your bin. Add those 2 numbers together. This is your interconnect outside cable length. REFER TO GREEN ARROWS.
TO FIND MOISTURE / TEMP CABLE LENGTH: Measure from the centre of the roof of your bin down to the floor. If you have an unload system, deduct another foot or two. REFER TO PINK ARROW.
THIS BIN REQUIRES A 3 SENSOR CABLE WITH A 20FT INTERCONNECT OUTSIDE CABLE.
If this didn't help, feel free to CONTACT US!
This cable attaches to the inside sensing cable at the top of the bin. Interconnect cables extend the length of the bin along the outside to allow cable reading from the ground.
This cable is 45 feet long.
The Docking Station protects the sensing cable from static electricity damage when not plugged in to a monitor. It is installed on to the grain bin and plugs in to the bottom of the interconnect cable.