Summers Spray Fill Xpress

SFX2430

The high capacity original model is 102 inches long (130 inches with pump) and can be fitted with 3, 4, 5 or 6 tanks for a total of 240 gallons.

Chemical Batching

To save time, chemicals in the stainless steel tank can be portioned into individual containment areas where they will remain separate until drawn into the sprayer. This avoids premixing, which can cause undesirable reactions.

Flow Meters and Scales

Provide precise measurements when adding chemicals.

Stainless Steel Tanks

Hold up to six different chemicals in the SFX2430, or four chemicals in the SFX1630 to add to a mix. Each tank includes a jug rinse system for convenient chemical jug cleanout.

Deep Sump Tank

A deep, aggressively angled bottom helps prevent splashing and is integral in moving chemicals quickly into the sprayer. This design also allows complete drainage of the tank.

Rinse Wand

A handy solution for cleaning the chemical tanks, or for making a slurry during dry chemical induction.

Rinse System Valves

These days, cleanliness with ag chemicals is more important than ever, which is why the Spray Fill Xpress has a fully featured rinse system. A main valve controls the flow of water. Then it can be directed either to the rinse wand, tank/jug rinse or manifold rinse by opening the indicated valves.

Forklift Access Holes

Quickly and easily move the Spray Fill Xpress from the ground to a tending trailer with the forklift access holes. At just 78 inches long, the SFX1630 is small enough to fit crossways on a trailer.

Modular Design

The SFX2430 is customizable using 3, 4, 5 or 6 tanks in 40- and 80-gallon capacities, for a total capacity of 240 gallons. The smaller SFX1630 is customizable using 2, 3 or 4 tanks for a total capacity of 160 gallons.

Flow Meters

Flow meters provide precise chemical measurements.

Scales

Optional scales accurately weigh chemicals, so you can be assured the right amount goes into your sprayer. Simply weigh the chemicals going into an individual containment area, then reset the scale and weigh the next chemical.

Pump/Engine

An optional pump & engine package can be added to the Spray Fill Xpress to pump water from the holding tank to the sprayer. It features an electric start, 13HP motor and centrifugal pump that moves water at 440 GPM.